Refurbished SP-3G Swimming Pool Ozone Generator
Please take care to choose 110V from the drop-down menu for United States and 220V for Europe (EU), United Kingdom (UK), and Australia (AU). This choice will ensure that you get the proper voltage to use in your country.
SP-3G (swimming pool) series
The A2Z SP series is designed to integrate smoothly into your swimming pool system via ozone injection method. These units are designed in 3g, 5g, 8g, and 16g/hr ozone output to correspond to your pool size. Please view the spec sheet below to find the right generator and injector size for your pool.
The SP-3G model outputs 3g/ozone per hour and is ideal for pools (or other large water applications) up to 25,000 gallons to 95,000 liters.
If you are tired of itchy, irritated eyes and skin from chlorine and chemicals- then it is time to try OZONE! Ozone is faster and more effective then chlorine at killing bacteria because chlorine needs to diffuse through the cell wall and disrupt bacteria metabolism. Ozone rips open the cell wall from the outside, causing the cell contents to fall apart. This process is called cell lysing. With ozone, after the destruction of the cell, 03 simply reverts back to 02. The additional oxygen in the water creates a safe, clean and refreshing swimming experience that only ozone can provide. There are no toxic or hazardous byproducts!
|CD Corona Discharge||Ozone Output: 3 G/H|
|Air-Cooled||Concentration: g/m3 Oxygen:25-45 Air:5-15|
|LED Status Indicators||Electric Voltages: 220/240 or 110/120 VAC 50/60 Hz|
|Variable Ozone Output Control (10%-100%)||Power Watt: 80|
|PTFE tube for 03 Outlet||Size Inches: 11x8x14.3|
|Stainless Steel Fittings||Weight Pounds: 14|
A2Z SP series is designed to plumb into your swimming pool pipeline via venturi injector method. A2Z manufactures our own venturi injectors in ¼”, ½”, ¾” 1 inch, 1.5 inch and 2 inch sizes. Identify the pool water supply line after the pump, filter and heater- tap into this location. Glue in the proper injector, noting the direction of flow, arrow on venturi should be set as the same direction as water flow. In-depth installation is included in our SP series manual (included with every purchase) and available for download by clicking here.