Onyx A-016 Oxygen Generator| A2Z Ozone

Onyx A-016 Oxygen Generator

$ 1,600.00

Air contains 21% oxygen, 78% nitrogen, 0.9% argon, and 0.1% other gases. AirSep Oxygen Generating Systems separates oxygen from compressed air through a unique pressure swing adsorption process. The PSA process uses a molecular sieve (a synthetic zeolite), which attracts (adsorbs) nitrogen from air at high pressure and releases (desorbs) it at a low pressure.

 We recommend choosing an oxygen generator based on the following table:

A2Z Ozone Generator AirSep Oxygen Generator
Output 1Gram to 10Grams Onyx A-016 Oxygen Generator
Output 16Grams to 32Grams Topaz A-012 Oxygen Generator
Output 32Grams + Topaz Ultra AS-123-1 Oxygen Generator

 

AirSep Oxygen Generators use two vessels filled with a molecular sieve as adsorbers. As compressed air flows through one of the vessels, the  molecular sieve adsorbs nitrogen. The remaining oxygen passes through the vessel and exits as the product gas. Before the adsorber becomes saturated with nitrogen, the feed air is diverted to the second vessel. At that point, the sieve in the first vessel regenerates by desorbing the nitrogen through depressuraization and purging it with oxygen from the second vessel.

 

This process is then repeated in the second vessel to complete a cycle that allows the oxygen generator to deliver a constant flow of product oxygen at 90% minimum purity. Under normal operating conditions, the molecular sieve is completely regenerative and will last indefinitely.

 

 Specifications

Product Flow1

6 LPM (12 SCFH)
Product Pressure 9 psig (62 kPa)
Product Concentration (nominal) 93%
Product Dew Point

-100°F (-73°C)

Dimensions (W x D x H) (nominal)

16 x 15 x 29 in (40 x 37 x 72 cm)

Weight 

51 lb (23 kg) [Add 1 lb (0.4 kg) for 220 V ~ unit]

Physical Connection Product Gas Outlet

1/4" FNPT JIC-8

Ambient Operating Conditions

Locate the oxygen generator in well-ventilated area that is protected from weather elements and remains between 40°F (4°C) and 112°F (44°C)

Control Power Requirements (Single Phase)

120V ~ ± 10%, 60 Hz, 5.0 A

220V ~ ± 10%, 50 Hz, 2.5 A

220V ~ ± 10%, 60 Hz, 2.3 A

1LPM (Liters per minute) gas measured at 1 atmosphere and 21°C / SCF (Standard cubic foot) gas measured at 1 atmosphere and 70°F

 

For all returned units within 30 days, there is a 20% restocking fee and shipping is paid both to and from A2Z Ozone, Inc. by the customer. In the case of warranty work, shipping from the customer will be paid for by the customer and return U.S. shipping from A2Z Ozone will be paid by A2Z Ozone. International shipping will be paid for by the customer both ways.

Related products