S-50G Industrial Ozone Generator
S-50G Industrial Ozone Generator
Shipping Policy: Please see our Shipping Policy Page for details.
To speak with a product specialist, call us at 1+502-499-4977 between the hours of 8:00 am and 4:00 pm Eastern Standard Time, Monday through Friday.
Email firstname.lastname@example.org or email@example.com for more information about our specialty product, the S-50G.
Please allow 6-8 weeks for build.
The A2Z Model S-50G ozone generator is designed especially for use by laboratories in universities and hospitals.
The components of the Model S-50G are mounted in a rugged stainless steel cabinet, and all parts that come into contact with oxygen and ozone are made of stainless steel, glass or PTFE tube.
The Model S-50G ozone generator uses a water-cooled Corona Discharge (CD) tube to generate ozone from a variety of pressurized sources such as compressed air, bottled oxygen or an oxygen generator. The result is high ozone concentration yields at low energy demand.
Switches and LED status indicator lights are provided for the ozone generator and the air compressor. The concentration of ozone discharged is controllable from 0 to 100% by a dial potentiometer to vary the current to the CD tube, as displayed on a 300-800mA amp meter. Should the unit stop making ozone for any reason, a fault warning light is displayed. The unit is protected electrically by an externally-accessible fuse.
The Model S-50G ozone generator comes complete with pre-installed fittings and all required tubing, enabling it to be installed and running in less than ten minutes.
- Air Cooled, Corona Discharge Ozone Generator 50 g/hr
- LED Status Indicators
- Variable ozone output control (60-100%)
- Adjustable flow meter
- Default warning system
- 0-0.9mA panel meter
- Stainless Steel Frame and enclosure
- A2ZS-50G model produces up to 50 grams per hour
- Stainless steel, PTFE, quartz glass or ceramic tube for O3 outlet
- Stainless steel oxygen inlet and outlet
- Ozone Capacity: 50 gr/hour
- Electrical:110V/120VAC 220V/240VAC 50/60HZ
- Oxygen Feed Flow Rate: 12 LPM, 25.5 SCFH
- Size: 32”H x 16”W X 44”D
- Cooling Requirement: Water
- Water cooling flow rate: 0.5 to 2 GPM (depends on water and room temperature)
- Energy Usage: 660 W
- Ozone concentration: 39-65 g/m3
- Weight: 125 lbs, 57 KG
Please Note: Operate with good ventilation inside of a hood. In case of exposure, remove to fresh air. If inhaled, ozone can damage the lungs.
Please note: Keep away from natural gas, oil, gasoline, or other flammable chemicals as it could be an extreme fire hazard.
Call A2Z Ozone at 502-499-4977 between 8:00 am and 4:00 pm EST, Monday through Friday to troubleshoot if you have an issue with your unit.
*These units include a one-year parts and service warranty. Shipping to A2Z Ozone will be paid for by the customer, but return shipping for U.S. customers will be included. International shipping will be paid by the customer both ways.
**In Accordance with California Regulations -- This Ozone Generator is Solely for Industrial Use and Must be Installed by a Professional. Potential Health Hazard: Emits Ozone.**
For Use in Well-Ventilated Areas!
In Case of Accidental Leakage of Ozone, Keep the Ozone Generator in a Well-Ventilated Area.
Ozone Generators Emit Ozone. Do Not Inhale Ozone.
Ozone Generators generate high voltage.
Our ozone generators are designed and Distributed by A2Z Ozone, Inc. in Louisville, Kentucky USA.
EPA Est.: 95432-KY-1