Refurbished 1G Lab Benchtop Ozone Generator
Refurbished 1G Lab Benchtop Ozone Generator
Couldn't load pickup availability
To speak with a product specialist, call A2Z Ozone at 1+502-499-4977 between the hours of 8:00 am and 4:00 pm Eastern Standard Time, Monday through Friday.
Email sales@a2zozone.com or info@a2zozone.com for more information about our specialty product.
Shipping Policy: Please see our Shipping Policy Page for details.
The A2Z Model 1G LAB ozone generator is designed especially for use by laboratories in universities and hospitals. The lab benchtop unit is designed to work with pure oxygen only.
The components of the Model 1G LAB are mounted in a rugged stainless steel cabinet, and all parts that come into contact with oxygen and ozone are made of stainless steel, glass or PTFE tubing.
The Model 1GLAB ozone Generator uses a fan-cooled Corona Discharge (CD) tube to generate ozone from a variety of pressurized sources such as compressed air, bottled oxygen or an oxygen generator.
The production of ozone can be controlled on both the input and output sides of the unit. The amount of air or oxygen entering is varied by an adjustable flow regulator, while the concentration of ozone discharged is varied by a potentiometer on the CD tube. These controls allow the Model 1GLAB Ozone Generator to greatly vary both the volume and concentration of ozone to fit many applications. Should the unit stop making ozone for any reason, a fault warning light will display.
The Model 1GLAB Ozone Generator comes complete with pre-installed fittings and all required tubing, enabling it to be installed and running in less than ten minutes.
Standard Features
- Air Cooled, Corona Discharge Ozone Generator
- LED Status Indicators
- Variable ozone output control (5-100%)
- Adjustable flow meter
- 0-0.9mA panel meter
- Benchtop enclosure
- A2ZS-1GLAB model produces up to 1000 mg/hr
- Stainless steel, PTFE, quartz glass, and ceramic tube for O3 outlet
- Stainless steel oxygen inlet and outlet
Technical Specifications
- Model: A2ZS-1GLAB
- Ozone Capacity: 1000 mg/hr
- Electrical: 110/120VAC, 50/60 HZ; 220/240VAC, 50/60HZ
- Oxygen Feed Flow Rate: 0-3 LPM
- Size: 18x18x10 inches
- Cooling Requirement: AIR
- Energy Usage: 220V: 82.3 W; 110V: 96.7 W
- Ozone Concentration: Adjustable, see chart below
- Weight: 15 lbs.; 6.8 kg
Warranty
Please Note: Operate with good ventilation inside of a hood. In case of exposure, remove to fresh air. If inhaled, ozone can damage the lungs.
Please note: Keep away from natural gas, oil, gasoline, or other flammable chemicals as it could be an extreme fire hazard.
Call A2Z Ozone at 502-499-4977 between 8:00 am and 4:00 pm EST, Monday through Friday to troubleshoot if you have an issue with your unit.
In Case of Accidental Leakage of Ozone, Keep the Ozone Generator in a Well-Ventilated Area.

