MP-1000 Ozone Generator
The MP-1000 is equipped with a built-in internal air compressor and a heavy-duty cooling fan.
Shipping Policy: Please see our Shipping Policy Page for details.
- 15-minute to 4-hour adjustable timer
- Stainless steel handle for easy portability
- Optional oxygen feed hook up
- Internal air compressor
How it Works
- Plug your power cord into the back of the unit and the wall socket.
- Remove the bulkhead nut on O³ out port.
- Then insert the bulkhead onto the tubing.
- Screw the nut back onto the O³ out port.
- Attach the diffuser stone of your choosing to the opposite end of the tubing.
For Oxygen Air:
- Disconnect the small tubing from the O² in port.
- Connect the oxygen source to the O² in port with appropriate tubing.
- Adjust the flow rate of the oxygen source to:
- For the MP-1000, a maximum of 1-3 L/minute.
- For MP-3000, MP-5000 and MP-8000 a maximum of 2-4 L/minute or PSI 5.
For Ambient Air:
- Turn on both air compressor switch and the ozone switch, in that order.
- Keep in mind, the unit will NOT power up until the timer is set.
- Turn the power button on – it is located on the back of the unit by the power cord.
- Turn the ozone concentration knob to 100 percent or the desired concentration for the given application.
Set the unit timer for the desired application duration.
Please note: Use a degasifier and an ozone destructor to ensure proper ozone dissapation.
Please Note: Operate with good ventilation. In case of exposure, remove to fresh air. If inhaled, ozone can damage the lungs.
Please note: Keep away from natural gas, oil, gasoline, or other flammable chemicals as it could be an extreme fire hazard.
- MP-1000: 10.7x.6x9 inches, 8.5 lbs
- MP-3000: 8x12x10 inches, 13 lbs
- MP-5000: 8x15x10 inches, 15 lbs
- MP-8000: 9.8x15x10 inches, 18 lbs
- Ozone Output: 1 g/hour
- Oxygen Feed Gas Flow Rate: 1-3 LPM
- Energy Usage: 45W
- Ozone Concentration: 0-14 gr/m3
Oxygen Concentration Flow Rate
1G 4.5K V/40KHZ
- Oxygen Flow Rate (L/M): 0.25, Ozone Output: 528mg/h
- Oxygen Flow Rate (L/M): 0.5, Ozone Output: 810mg/h
- Oxygen Flow Rate (L/M): 0.75, Ozone Output: 1012mg/h
- Oxygen Flow Rate (L/M): 1, Ozone Output: 1170mg/h
- Oxygen Flow Rate (L/M): 2, Ozone Output: 1620mg/h
- Oxygen Flow Rate (L/M): 3, Ozone Output: 1260mg/h
- MP-1000 ozone generator
- MP-1000 Operation Manual
- 8 feet of flexible polyurethane tubing
- 8 feet PTFE tubing
- Two 2” oblong diffuser stones
- Spare fuse
- Fan filter replacement
Call A2Z Ozone at 502-499-4977 between 8:00 am and 4:00 pm EST, Monday through Friday to troubleshoot if you have an issue with your unit.
*These units include a one year parts and service warranty. Shipping to A2Z Ozone will be paid for by the customer, but return shipping for U.S. customers will be included. International shipping will be paid by the customer both ways.
**In Accordance with California Regulations -- This Ozone Generator is Solely for Industrial Use and Must be Installed by a Professional. Potential Health Hazard: Emits Ozone.**
For Use in Well-Ventilated Areas!
Ozone Generators Emit Ozone. Do Not Inhale Ozone.
Ozone Generators generate high voltage.
Our ozone generators are designed and Distributed by A2Z Ozone, Inc. in Louisville, Kentucky USA.
EPA Est.: 95432-KY-1