6G Lab Ozone Generator
To speak with a product specialist, call A2Z Ozone at 1+502-499-4977 between the hours of 8:00 am and 4:00 pm Eastern Standard Time, Monday through Friday.
Email firstname.lastname@example.org or email@example.com for more information about our specialty product.
The A2Z Model 6G Lab Ozone Generator (ozonator) is designed especially for use by laboratories in universities and hospitals.
The components of the Model 6G Lab Ozone Generator are mounted in a rugged stainless steel cabinet, and all parts that come into contact with ozone are made of stainless steel, glass, or PTFE tube.
The Model 6G Lab Ozone Generator uses a fan-cooled Corona Discharge (CD) tube to generate ozone from a variety of pressurized sources such as compressed air, bottled oxygen, or an oxygen generator.
The production of ozone can be controlled on both the input and output sides of the unit. The amount of air or oxygen entering is varied by an adjustable flow regulator, while the concentration of ozone discharged is varied by a potentiometer on the CD tube. These controls allow the Model 6G Lab Ozone Generator to greatly vary both the volume and concentration of ozone to fit many applications. Should the unit stop making ozone for any reason, the ozone generator displays a fault warning light.
The Model 6G Lab Ozone Generator comes complete with pre-installed fittings and all required tubing, enabling it to be installed and running in less than ten minutes.
Please Note: Operate with good ventilation inside of a hood. In case of exposure, remove to fresh air. If inhaled, ozone can damage the lungs.
Please note: Keep away from natural gas, oil, gasoline, or other flammable chemicals as it could be an extreme fire hazard.
• Air Cooled, Corona Discharge Ozone Generator 6gr/hr
• LED Status Indicators
• Variable ozone output control (40-100%)
• Adjustable flow meter
• Default warning system
• 0-0.9mA panel meter
• Stainless Steel Frame and enclosure
• 6G Lab Ozone Generator model produces up to 6 grams per hour
• Stainless steel, PTFE, quartz glass, and ceramic tube for O3 outlet
• Stainless steel oxygen inlet and outlet
- 6G Lab Ozone Generator
- User's Manual
- 8 Ft. PTFE tubing
- 8 Ft. polyurethane tubing
- Ozone output g/h= 6
- Concentration g/m3 = Oxygen supply: 30-50, Air supply: 10-25
- Electric voltage: 220/240 VAC 50/60 HZ or 110/120 VAC 50/60 HZ
- Power Watt: 110 W
- Size in Inches- 26 x 16 x 14
- Weight- 30 lbs
- Gas feed- Oxygen or clean dry air
- Cooling System- Air cooling fan
**In Accordance with California Regulations -- This Ozone Generator is Solely for Industrial Use and Must be Installed by a Professional. Potential Health Hazard: Emits Ozone.**
Call A2Z Ozone at 502-499-4977 between 8:00 am and 4:00 pm EST, Monday through Friday to troubleshoot if you have an issue with your unit.
*These units include a one-year parts and service warranty. Shipping to A2Z Ozone will be paid for by the customer, but return shipping for U.S. customers will be included. International shipping will be paid by the customer both ways.
Ozone Generators Emit Ozone. Do Not Inhale Ozone.
Ozone Generators generate high voltage.
Our ozone generators are designed and Distributed by A2Z Ozone, Inc. in Louisville, Kentucky USA.
EPA Est.: 95432-KY-1