25.4mm PVDF Venturi Injector
25.4 MM PVDF Venturi Injector
This Venturi Injector is used in Metric assemblies.
Shipping Policy: Please see our Shipping Policy Page for details.
A Venturi Injector can be used with any of our products to help inject ozone or other gases into water. The injector can be paired with any of our generators, but is needed specifically for the SP and Aquatic units. For the use of this venturi, it is recommended to use a 2" PVC pipe. It works by using pressurized water in the inlet side of the Venturi to decrease absolute pressure, thereby creating a vacuum. This vacuum allows for any additive material to be drawn through the suction port and mix with your water stream. As your infused water exits the Venturi, it becomes reconverted into lower pressure energy. This process combines two different substances to create a fluid mix of the two, then releases the combined products through the outlet side.
Note: Injectors are nonreturnable
In Case of Accidental Leakage of Ozone, Keep the Ozone Generator in a Well-Ventilated Area.
For Use in Well-Ventilated Areas!
Ozone Generators Emit Ozone. Do Not Inhale Ozone.
Ozone Generators generate high voltage.
Our ozone generators are designed and Distributed by A2Z Ozone, Inc. in Louisville, Kentucky USA.
EPA Est.: 95432-KY-1