2" Ozone Resistant Round Diffuser Stone -- Gray (MP-Series)
Includes one 2" Ozone Resistant Round Diffuser Stone.
(Note: tubing is not included with the stone. To purchase tubing, please see PTFE Tubing (by the foot) and make sure to select the MP Series for the size. If you wish to use flexible tubing, please see Flexible Tubing (per foot).)
Our official A2Z Ozone Diffuser stone is made of crystal quartz glass and has a coarse texture. This allows the ozone gas to be expelled through the stone creating fine bubbles that spread the ozone evenly throughout the water.
The difference between the white stone and the gray stone is that the bubbles will be smaller with the white stone. It is simply a matter of preference, as either stone will work for your water application.
This stone is made exclusively for the MP-Series Ozone Generators.
A2Z Ozone Diffuser stone is made from crystal quartz glass and has a coarse texture. This allows the ozone gas to be expelled through the stone creating fine bubbles that spread the ozone evenly throughout the water.
This stone is recommended for the MP-Series Ozone Generators.
Directions: On the O3 OUT (5), loosen the outer part of the bulk head, and insert tubing into ozone out port on the MP unit. Tighten the bulk head around the tubing. Place the other end of the tubing around the plastic part on the stone. Insert the stone into liquid and begin.
In Case of Accidental Leakage of Ozone, Keep the Ozone Generator in a Well-Ventilated Area.
Ozone Generators Emit Ozone. Do Not Inhale Ozone.
Ozone Generators generate high voltage.
Our ozone generators are designed and Distributed by A2Z Ozone, Inc. in Louisville, Kentucky USA.
EPA Est.: 95432-KY-1