2" Ozone Resistant Oblong Diffuser Stone Set-- 2 Gray (MP-Series--MP-1000, MP-3000, MP-5000, MP-8000)
Each set includes two 2" Ozone Resistant Oblong Gray Diffuser Stones. (Note: tubing is not included with the stone set. To purchase tubing, please see PTFE Tubing (by the foot) and make sure to select the MP Series for the size. If you wish to use flexible tubing, please see Flexible Tubing (per foot).)
Shipping Policy: Please see our Shipping Policy Page for details.
Our official A2Z Ozone Diffuser stones are made of crystal quartz glass and have a coarse texture. This allows the ozone gas to be expelled through the stone creating fine bubbles that spread the ozone evenly throughout the water.
The difference between the white stone and the gray stone is that the bubbles will be smaller with the white stone.
These stones are made exclusively for the MP-Series (MP-1000, MP-3000, MP-5000, MP-8000) Ozone Generators.
Directions: On the O3 OUT (5), loosen the outer part of the bulk head, and insert tubing into ozone out port on the MP unit. Tighten the bulk head around the tubing. Place the other end of the tubing around the plastic part on the stone. Insert the stone into liquid and begin.
Note: Stones are nonreturnable.
In Case of Accidental Leakage of Ozone, Keep the Ozone Generator in a Well-Ventilated Area.
Ozone Generators Emit Ozone. Do Not Inhale Ozone.
Ozone Generators generate high voltage.
Our ozone generators are designed and Distributed by A2Z Ozone, Inc. in Louisville, Kentucky USA.
Note: refunds cannot be applied to accessories or parts. No returns are accepted for accessories or parts. If you have a problem with an accessory or part, please call us to troubleshoot.
EPA Est.: 95432-KY-1