1/4"Venturi Injector| A2Z Ozone

1/4" Venturi Injector

$ 9.99

1/4" PVDF Venturi Injector

A Venturi Injector can be used with any of our products to help inject ozone or other gases into water. The injector can be paired with any of our generators, but is needed specifically for the SP and Aquatic units. It works by using pressurized water in the inlet side of the Venturi to decrease absolute pressure, thereby creating a vacuum. This vacuum allows for any additive material to be drawn through the suction port and mix with your water stream. As your infused water exits the Venturi, it becomes reconverted into lower pressure energy. This process combines two different substances to create a fluid mix of the two, then releases the combined products through the outlet side. Here is a table giving some data about what Venturi Injector is right for you if you are using an SP unit.

 

Pool Size Ozone Output Required Recommended Venturi Sizing
25,000G/95,000L 3000MG/H(3G/H) 1/4" or 1/2"
50,000G/190,000L 5000MG/H(5G/H) 1/2" or 3/4"
100,000G/380,000L 8000MG/H(8G/H) 1/2" or 3/4"
200,000G/760,000L 16000MG/H(16G/H) 1"

Customer Reviews

Based on 1 review Write a review

Related products