Video Gallery

Using the A7K for Mold Remediation

Follow these instructions to use the A7K for mold remediation. 7000 mg/hour of ozone is needed to treat mold and mildew.

Aqua-8 Water Applications

See how to use the Aqua-8 Ozone Generator for water applications. 

Eliminating Car Odor

Follow this step-by-step guide to perform an ozone treatment for any car. Ozone treatment will eradicate unpleasant odors.

How Ozone Diffuser Stones Work

Our technician explains how diffuser stones are used with ozone generators to diffuse ozone into air, water and oil.

Replacing Back Rocker Switch

Follow this walkthrough to replace the back rocker switch on the MP-1000, MP-3000, MP-5000, MP-8000 or A7K Air Ozone Generator.

Oxygen Generator to MP-3000, 5000, 8000

Our technician walks through the process of attaching an oxygen generator or oxygen tank to the MP-3000 and above.

Oxygen Generator to MP-1000

Our technician walks through the process of attaching an oxygen generator or oxygen tank to the MP-1000 Multi-Purpose Ozone Generator.

Oxygen Generator to Aqua-8

Our technician walks through the process of attaching an oxygen generator or oxygen tank to the Aqua-8 Multi-Purpose Ozone Generator.

 

Aqua-8 Unboxing

Our technician unboxes the new Aqua-8 and describes new features on the unit.

How to Setup Saltwater Tank

This video follows our process for setting up our saltwater tank in the A2Z Shop.

Benefits of Ozone in Fish Tanks

Ozone is proven to be one of the most effective and safe methods to remove bacterial, viral and fungal activity.

How to Ozonate Water

This video walks through the process of ozonating a glass of water, which is one of the most common uses of the Aqua-6.

How to Remove Moisture from Silica Air Dryer

Occasionally, the Silica Air Dryer may get full of moisture, changing the color of the beads. Follow this video to remove moisture.

How to Get Ozonated Water on Demand

Our technician walks through the process of installing the Aqua-6 onto any faucet with a check valve.

How to Change Ozone Tube in Aqua-6

Follow this step-by-step guide to easily install a new tube in this best selling unit.

How to Change MP Series Voltage

This walkthrough shows how to change the voltage on any MP unit from 110 volts to 220 volts.

MP-3000 Soda Experiment

Our technician tests the impact of the MP-3000 on a glass of coke.

Water Application in Aqua-6

Our technician talks about the many uses of the Aqua-6 and tries a glass of fresh ozonated water made from the machine.

How to Replace Ozone Cell in MP Unit

Our technician goes through the step-by-step process of replacing the ozone cell in MP units.

How to Sanitize Meat at Home

In this video, we show an effective way to sanitize meats with ozone treatment.

Aqua-6 Unboxing

Our technician unboxes the Aqua-6 ozone generator.

How to Remove Water Discoloration with MP Series

A2Z Ozone conducted a fun experiment to determine how the Aqua-6 would handle dyes placed in a glass of water.

 

How to Change Board in MP Series

This video shows you how to replace your ozone board in our MP Series.

How to Change Plate in Ozone Generator

This video shows how to change your plates on your A7K ozone generator.

How to Replace Barb Fittings

This video will explain how to manage the MP Unit cell barb fittings.

How to Install Air Dryer on MP Series

This video will assist you in setting up your A2Z Ozone Silica Air Dryer with your MP Series ozone generator.

How to Hook Up ORP Monitor to Fish Tank

How to hook up your ORP monitor to a fish tank to be able to check ph levels in your water at any given time.

Replacing Ozone Cell and Board with Aqua-6 Repair Kit

This is a step-by-step video on how to change your cell and board using the Aqua-6 repair kit.