Want Ozonated Water On-Demand? Use an Ozone Faucet Aerator | A2Z Ozone

Want Ozonated Water On-Demand? Use an Ozone Faucet Aerator | A2Z Ozone

What is an Ozone Faucet Aerator?

A faucet aerator is a small device that you can install to the end of any sink. It has a small piece of mesh to allow air to flow through the water stream. We will add ozone to the stream and it will make an ozonated water source.

What do You Need?

You will need:

  1. A2Z Ozone's Aqua-8 Ozone Generator or Aqua-6 Ozone Generator
  2. A2Z Ozone's Ozone Faucet Aerator
  3. Polyeurethane Flexible Tubing from A2Z Ozone
  4. Check Valve (Optional)

How do You Install an Ozone Faucet Aerator?

Join the Ozone Faucet Aerator with water ozone generators and most kitchen or bathroom sinks. Use the tubing provided with your ozone generator to connect the ozonator to the Ozone Faucet Aerator.

Do You Need an Adapter?

The Ozone Faucet Aerator comes equipped with an adapter for the male or female fitting faucet. See detailed instructions below, or watch our video. Get ozonated water on demand. Make sure to test the setup.

How do I Test the Setup?

First, you test the flow. To get a good idea on how to test the flow, check the video. 

Getting the Ozone into the Water from the Ozone Generator

After installing the Ozone Faucet Aerator, place one end of the tubing into your ozone generator's Ozone Out port. Place the other end of the tubing into A2Z Ozone's Ozone Faucet Aerator.

Do I Need a Check Valve?

Ensure no water is flowing back into the tube. Install the ozone generator (or the tube) in a higher position than your faucet. For added protection consider installing a check valve.

Added Protection: The Check Valve

To install the check valve, cut a piece of the tubing between the ozone generator and the Ozone Faucet Aerator. Then, put the check valve with the arrow facing the water source on both sides of the tubing. 

Installation is quick, just follow these steps:

 Steps to Instant Ozonated Water:

  • Decide which adapter your sink needs – male or female.

  • Screw into your sink (you can view the video above for help).

  • Plug one end of the flexible tubing into the “Ozone Out” port and then connect the other end to the Ozone Faucet Aerator.

  • Make sure to test. Ensure no water is flowing back into the tube. We recommend installing the ozone generator (or the tube) in a higher position than your faucet. For added protection consider installing a check valve.

When you’re ready to use your faucet aerator:

  • Turn on your ozone generator for roughly 30 seconds before you intend to turn on the faucet water.

  • Operate your faucet as you would normally – now your water will be ozonated!

  • Don’t forget to turn off your ozone generator after use. You may leave your tubing all plugged in. 

  • Enjoy!

 Now you won’t have to wait for your water to finish its treatment cycle. Use ozonated water for all your favorite applications, now that much quicker.


Replacing Tubing / Ozone Faucet Aerator

Replace the check valve when you do the tubing--about every six months to a year, depending on wear and tear. You can replace the Ozone Faucet Aerator when the water flows only to one side of the faucet.

Do I have to replace the Ozone Faucet Aerator?

First, you can try cleaning the mesh and sides of the Ozone Faucet Aerator. If this does not work, then you can replace it.

Get all the benefits of an aerator and ozonated water with our easy-to-install accessory!  Purchase the faucet aerator here. 


Other Benefits of Using the Ozone Faucet Aerator

Now, there are other benefits to using the Ozone Faucet Aerator. A faucet aerator adds air between the small streams of water that make up the whole water flow from your sink.

What Does HUD Say?

According to the U.S. Department of Housing and Urban Development (HUD), your new faucet aerator will save energy with hot water usage. It will save on water usage, like a water-efficient showerhead.

A Faucet Aerator will Save on Water and Electricity

Of course, the kitchen or bathroom aerator will not have the same savings of water as a water-efficient showerhead. HUD says that an old showerhead can use an incredible 5 to 10 gallons per minute. The water-efficient showerhead provides 2.5 gpm of water. A straight faucet will send 3 to 5 gpm to your sink. By adding the faucet aerator, you are getting a flow rate of 0.5 to 1.5 gpm in your bathroom and 2.2 gpm in the kitchen.

The Bottom Line:

HUD goes on to say, "In addition to saving energy and water, the 'foamier' water that comes from faucet aerators wets objects better than water from a faucet with no aerator, which tends to bounce off the object rather than thoroughly wetting it." But the bottom line is saving water and energy leaves you with more money every single month.





In case of accidental leakage of ozone, keep the ozone generator in a 
well- ventilated area. 
Ozone generators emit ozone. Do not inhale ozone. 
Ozone generators generate high voltage. 
Our ozone generators are designed and distributed by A2Z Ozone, Inc. in Louisville, Kentucky USA. EPA Est.: 95432-KY-1. Produced and made in China.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.