Refurbished SP-16G Swimming Pool Ozone Generator
The A2Z SP Series is designed to integrate smoothly into your swimming pool system via ozone injection method. These units are designed in 3g, 5g, 8g and 16g/hr ozone output to correspond to your pool size. Please view the spec sheet below to find the right generator and injector for your pool.
The SP-16G model outputs 16g/ozone per hour and is ideal for pools (or other large water applications) up to 35,000 gallons or 132,489 liters. For warmer climates, the SP-16 ill treat 17,500 gallons or 66,244 liters.
If you are tired of itchy, irritated eyes and skin from chlorine and chemicals- then it is time to try OZONE! Ozone is faster and more effective then chlorine at killing bacteria because chlorine needs to diffuse through the cell wall and disrupt bacteria metabolism. Ozone rips open the cell wall from the outside, causing the cell contents to fall apart. This process is called cell lysing. With ozone, after the destruction of the cell, 03 simply reverts back to 02. The additional oxygen in the water creates a safe, clean and refreshing swimming experience that only ozone can provide.There are no toxic or hazardous byproducts!
Important: These units are not waterproof. Please try to refrain from getting them wet.
CD Corona Discharge
LED Status Indicators
Variable Ozone Output Control (10%-100%)
Stainless Steel Fittings
- Ozone Output: 16 g/hour
- Ozone Concentration: g/m3 Oxygen: 25-45 Air: 5-15
- Electric Voltages: 220/240 or 110/120 VAC 50/60 Hz
- Power Watt:190 W
- Size: 15x8x18
- Weight: 22.5 lbs
A2Z SP series is designed to plumb into your swimming pool pipeline via venturi injector method. A2Z manufactures our own venturi injectors in ¼”, ½”, ¾” 1 inch, 1.5 inch and 2 inch sizes.
For 2" or 1 1/2" piping, it is necessary to build a manifold and use a 1" Venturi Injector. Use the Venturi Injector 1/2" the size of the pipe size. If you wish for us to build the manifold, please visit our accessories page and select the manifold you need.
Identify the pool water supply line after the pump, filter and heater- tap into this location. Glue in the proper injector, noting the direction of flow, arrow on venturi should be set as the same direction as water flow. In-depth installation is included in our SP series manual (included with every purchase) and available for download by clicking here.
In Case of Accidental Leakage of Ozone, Keep the Ozone Generator in a Well-Ventilated Area.
Ozone Generators Emit Ozone. Do Not Inhale Ozone.
Ozone Generators generate high voltage.
Our ozone generators are designed and Distributed by A2Z Ozone, Inc. in Louisville, Kentucky USA.
EPA Est.: 95432-KY-1