16G Lab Ozone Generator
To speak with a product specialist, call us at 1+502-499-4977 between the hours of 8:00 am and 4:00 pm Eastern Standard Time, Monday through Friday.
Email firstname.lastname@example.org for more information about our specialty product.
Shipping Policy: Please see our Shipping Policy Page for details.
The A2Z Model 16G Ozone Generator is designed especially for use by laboratories in universities and hospitals.
The components of the Model 16G Lab Ozone Generator are mounted in a rugged stainless steel cabinet, and all parts that come into contact with oxygen and ozone are made of stainless steel, glass or PTFE tube.
The Model 16G Lab Ozone Generator uses a fan-cooled Corona Discharge (CD) tube to generate ozone from a variety of pressurized sources such as compressed air, bottled oxygen, or an oxygen generator.
The production of ozone can be controlled on both the input and output sides of the unit. The amount of air or oxygen entering is varied by an adjustable flow regulator, while the concentration of ozone discharged is varied by a potentiometer on the CD tube. These controls allow the Model 16G Lab Ozone Generator to greatly vary both the volume and concentration of ozone to fit many applications. Should the unit stop making ozone for any reason, a fault warning light is displayed.
The Model 16G Lab Ozone Generator comes complete with pre-installed fittings and all required tubing, enabling it to be installed and running in less than ten minutes.
Please Note: Operate with good ventilation inside of a hood. In case of exposure, remove to fresh air. If inhaled, ozone can damage the lungs.
Please note: Keep away from natural gas, oil, gasoline, or other flammable chemicals as it could be an extreme fire hazard.
- Air Cooled, Corona Discharge Ozone Generator 16gr/hr
- LED Status Indicators
- Variable ozone output control (60-100%)
- Adjustable flow meter
- Default warning system
- 0-0.9mA panel meter
- Stainless Steel Frame and enclosure
- A2ZS-16G model produces up to 16 grams per hour
- Stainless steel, PTFE, quartz glass or ceramic tube for O3 outlet
- Stainless steel oxygen inlet and outlet
- 16G Lab Benchtop Ozone Generator
- User's Manual
- 8 Ft. PTFE tubing
- 8 Ft. polyurethane tubing
- Model: A2ZS-16G
- Ozone Capacity: 16g/hr
- Electrical: 120VAC 50/60 HZ or 240VAC 50HZ
- Oxygen Feed Flow Rate: 5 LPM, 10.5 SCFH
- Size: 26 x 16 x 14
- Cooling Requirement: AIR
- Energy Usage: 180 W
- Ozone concentration: 33-55 g/m3
- Weight: 36 lbs, 16.3 KG
Call A2Z Ozone at 502-499-4977 between 8:00 am and 4:00 pm EST, Monday through Friday to troubleshoot if you have an issue with your unit.
*These units include a one-year parts and service warranty. Shipping to A2Z Ozone will be paid for by the customer, but return shipping for U.S. customers will be included. International shipping will be paid by the customer both ways.
**In Accordance with California Regulations -- This Ozone Generator is Solely for Industrial Use and Must be Installed by a Professional. Potential Health Hazard: Emits Ozone.**
For Use in Well-Ventilated Areas!
Ozone Generators Emit Ozone. Do Not Inhale Ozone.
Ozone Generators generate high voltage.
Our ozone generators are designed and Distributed by A2Z Ozone, Inc. in Louisville, Kentucky USA.
EPA Est.: 95432-KY-1