S-150G Industrial Ozone Generator
Shipping Policy: Please see our Shipping Policy Page for details.
To speak with a product specialist, call us at 1+502-499-4977 between the hours of 8:00 am and 4:00 pm Eastern Standard Time, Monday through Friday.
This unit is built to order. Will require an additional 4-6 weeks of preparation time!
The A2Z Model S-150G ozone generator is designed especially for use by laboratories in universities and hospitals, and for research in water, medical, chemical, industrial research, and wastewater treatment facilities.
In chemical research, the Model S-150G is useful in Ozonolysis, the oxidation of alkenes by ozone to form alcohol. In wastewater research and treatment, ozone is a powerful oxidant to reduce the chemical oxygen demand (COD) and biochemical oxygen demand (BOD) of organic material.
The components of the Model S-150G are mounted in a rugged stainless steel cabinet, and all parts that come into contact with oxygen and ozone are made of stainless steel, glass or PTFE tube.
The Model S-150G ozone generator uses a water-cooled Corona Discharge (CD) tube to generate ozone from a variety of pressurized sources such as compressed air, bottled oxygen or an oxygen generator. The result is high ozone concentration yields at low energy demand.
Switches and LED status indicator lights are provided for the ozone generator and the air compressor. The concentration of ozone discharged is controllable from 0 to 100% by a dial potentiometer to vary the current to the CD tube, as displayed on a 300-800mA amp meter. Should the unit stop making ozone for any reason, a fault warning light is displayed. The unit is protected electrically by an externally-accessible fuse.
The Model S-150G ozone Generator comes complete with pre-installed fittings and all required tubing, enabling it to be installed and running in less than ten minutes.
- Water Cooled, Corona Discharge Ozone Generator 150 g/hour
- LED Status Indicators
- Variable ozone output control (60-100%)
- Adjustable flow meter
- Default warning system
- 0-0.9mA panel meter
- Stainless Steel Frame and enclosure
- A2ZS-150G model produces up to 150 grams per hour (O 2 supply)
- Stainless steel, PTFE, quartz glass or ceramic tube for O 3 outlet
- Stainless steel oxygen inlet and outlet
Ozone Capacity: 150 g/hour
Electrical: 110V/120VAC 220V/240VAC 50/60HZ
Oxygen Feed Flow Rate: 5-18 LPM, 10.5-38SCFH
Size: 45”H x 20”W X 14.5”D
Cooling Requirement: Water
Water cooling flow rate: 0.5 to 5 GPM (depend on water and room temperature)
Energy Usage: 1200 W
Ozone concentration: 50-100 g/m 3
Weight: 110 lbs, 50KG
Please Note: Operate with good ventilation inside of a hood. In case of exposure, remove to fresh air. If inhaled, ozone can damage the lungs.
Please note: Keep away from natural gas, oil, gasoline, or other flammable chemicals as it could be an extreme fire hazard.
Call A2Z Ozone at 502-499-4977 between 8:00 am and 4:00 pm EST, Monday through Friday to troubleshoot if you have an issue with your unit.
*These units include one-year parts and service warranty. Shipping to A2Z Ozone will be paid for by the customer, but return shipping for U.S. customers will be included. International shipping will be paid by the customer both ways.
**In Accordance with California Regulations -- This Ozone Generator is Solely for Industrial Use and Must be Installed by a Professional. Potential Health Hazard: Emits Ozone.**
For Use in Well-Ventilated Areas!
In Case of Accidental Leakage of Ozone, Keep the Ozone Generator in a Well-Ventilated Area.
Ozone Generators Emit Ozone. Do Not Inhale Ozone.
Ozone Generators generate high voltage.
Our ozone generators are designed and Distributed by A2Z Ozone, Inc. in Louisville, Kentucky USA.
EPA Est.: 95432-KY-1