Refurbished 5G Lab Benchtop Ozone Generator
To speak with a product specialist, call us at 1+502-499-4977 between the hours of 8:00 am and 4:00 pm Eastern Standard Time, Monday through Friday.
Shipping Policy: Please see our Shipping Policy Page for details.
The A2Z Model 5GLAB ozone generator (ozonator) is designed especially for use by laboratories in universities and hospitals, and for research in water, medical, chemical, industrial research, and wastewater treatment facilities. The lab benchtop unit is designed to work with pure oxygen only.
In chemical research, the Model 5GLAB is useful in Ozonolysis, the oxidation of alkenes by ozone to form alcohol. In wastewater research and treatment, ozone is a powerful oxidant to reduce the chemical oxygen demand (COD) and biochemical oxygen demand (BOD) of organic material.
The components of the Model 5GLAB are mounted in a rugged stainless steel cabinet, and all parts that come into contact with oxygen and ozone are made of stainless steel, glass or PTFE tubes.
The Model 5GLAB ozone generator uses a fan-cooled Corona Discharge (CD) tube to generate ozone from a variety of pressurized sources such as compressed air, bottled oxygen or an oxygen generator.
The production of ozone can be controlled on both the input and output sides of the unit. The amount of air or oxygen entering is varied by an adjustable flow regulator, while the concentration of ozone discharged is varied by a potentiometer on the CD tube. These controls allow the Model 5GLAB ozone generator to greatly vary both the volume and concentration of ozone to fit many applications. Should the unit stop making ozone for any reason, a fault warning light is displayed.
The Model 5GLAB ozone generator comes complete with pre-installed fittings and all required tubing, enabling it to be installed and running in less than ten minutes.
Please Note: Operate with good ventilation inside of a hood. In case of exposure, remove to fresh air. If inhaled, ozone can damage the lungs.
Please note: Keep away from natural gas, oil, gasoline, or other flammable chemicals as it could be an extreme fire hazard.
- Air Cooled, Corona Discharge Ozone Generator 5000 mg/hr
- LED Status Indicators
- Variable ozone output control (5-100%)
- Adjustable flow meter
- 0-0.9mA panel meter
- Benchtop enclosure
- A2ZS-5GLAB model produces up to 5000 mg/ hr
- Stainless steel, PTFE, quartz glass, and ceramic tube for O3 outlet
- Stainless steel oxygen inlet and outlet
- Model: A2ZS-5GLAB
- Ozone Capacity: 5000 mg/hr.
- Electrical: 110/120VAC, 220/240VAC; 50/60HZ
- Oxygen Feed Flow Rate: 1.75 LPM, 2 SCFH
- Size: 18 X 18 X 10 in.
- Cooling Requirement: AIR Energy Usage: 100 W
- Ozone Concentration: Adjustable, see chart below.
- Weight: 15 lbs.; 6.8 kg
**In Accordance with California Regulations -- This Ozone Generator is Solely for Industrial Use and Must be Installed by a Professional. Potential Health Hazard: Emits Ozone.**
For Use in Well-Ventilated Areas!
In Case of Accidental Leakage of Ozone, Keep the Ozone Generator in a Well-Ventilated Area.
Ozone Generators Emit Ozone. Do Not Inhale Ozone.
Ozone Generators generate high voltage.
Our ozone generators are designed and Distributed by A2Z Ozone, Inc. in Louisville, Kentucky USA.
EPA Est.: 95432-KY-1