How to Use Ozone Generator for Fire Restoration

A7K Air Applications Air-3500 Air-7000 Smoke Odor

Sometimes no matter how much the area is ventilated or cleaned, the lingering smell of smoke just won’t go away. Follow this step-by-step guide to learn how to effectively treat smoke damage in impacted areas with an ozone generator.
  1. To begin, remove all burnt and chard materials from the home.

  2. The A7K Air Ozone Generator is the best resource for removing smoke odors.

  3. This process will take a couple of days to complete.

  4. First, identify the room with the worst smoke odor. 

  5. Next, place the unit in the middle of the room and turn on both plates.

  6. Have the fan set on high with a 4-hour timer and have the timer repeat every hour to maximize the amount of ozone in the room.

  7. An oscillating fan would be beneficial to help move the ozone throughout the whole room.

  8. Run the unit for 1 day or ½ a day before moving on to the next room.

  9. Once the process has finished oxidizing the smoke molecules in the air, move the unit into the next room and repeat the process beginning with Step #5.

  10. Continue to repeat this process until all smoke smells are oxidized.

To see more applications for the A7K, click here.

Interested in the other products in our Air Series? Click here.



When operating an ozone generator, please remember to remove people, pets, and plants from the area. Be sure to leave the area being treated immediately and only return once the ozone has dissipated. Under most conditions, the treated area should be safe to return to 30 minutes to 1 hour after the unit stops producing ozone. Treated spaces or buildings should be well-ventilated prior to re-entry.

In case of accidental leakage of ozone, keep the ozone generator in a 
well- ventilated area. 
Ozone generators emit ozone. Do not inhale ozone. 
Ozone generators generate high voltage. 
Our ozone generators are designed and distributed by A2Z Ozone, Inc. in Louisville, Kentucky USA. EPA Est.: 95432-KY-1. Produced and made in China.

Older Post Newer Post

Leave a comment

Please note, comments must be approved before they are published