How to Use Ozone for Furniture Treatment

A7K Air Applications Air-3500 Air-7000 Apartment Odor Home Odor

how to use ozone generator to remove furniture odors

By using a unit from A2Z's powerful Air Series, lingering odors stuck in furniture can be eliminated. Whether it's caused by pets, smoke or more all-natural ozone can eradicate the odors for good.

Follow this step-by-step guide to remove unpleasant odors from furniture:

  1. To start, you will need an ozone generator and a tarp

  2. Once you have decided which item to ozonate first you will need to take the tarp and drape it over the item (ex: couch)

  3. Lay something to help hold down the tarp on the sides which will help hold in the ozone

  4. Then, take the ozone generator and place the exhaust side under the tarp making sure the air vents aren’t covered and are able to pull fresh air in

  5. You will then need to turn on your unit with both plates running, with the fan on high, and with a 30-minute run cycle

  6. Exit the house at this point or have this set up in a garage

  7. Once the cycle is complete, wait 30 minutes to 1 hour for the ozone to dissipate, then you can enter the area and decide if another treatment is needed

If you are trying to ozonate a smaller object you would need to get a plastic tote and cut a hole for the exhaust of the unit to fit in and another for excess gas to escape. Then run the unit for 30 minutes or less with the fan on a high setting.

 

 

Please Note: Be sure to only use your ozone generator in an unoccupied area. Our units produce high amounts of ozone. It is not safe to run the unit in an occupied area for more than 1 minutes. Be sure to remove any valuable items, pets and/or plants before you use the ozone generator. Do not breathe in ozone directly.

Learn more about our products designed for Home and Personal Use, click here.

To download a PDF of these instructions, click here.



Older Post Newer Post


Leave a comment

Please note, comments must be approved before they are published