A7K Ozone Generator Timer Function Guide

A7K Air Applications Car Odor Home Odor Hotel Odor Office Odor Pet Odor

These pre-programmed A7K timer functions can be controlled by using the buttons on the face of the unit or by the provided remote control for easy access:

  • 30 minutes 
  • 1 hour 
  • 2 hours
  • 4 hours

The A7K also features repeat cycles for ease of use.

The repeat cycles operate as follows:

  • When repeat cycle LED light is on, the cycle will repeat per the settings on the timer (30 minutes, 1 hour, 2 hours or 4 hours).
  • The fan will continue running with the ozone plates off after the cycle ends to help cool the unit down and to spread ozone throughout the area.
  • If the 1 Hour LED light is on beside the repeat cycle indicator, the selected timer function will repeat in 1 hour.
  • The unit will produce ozone for the selected amount of time (30 minutes, 1 hour, 2 hours or 4 hours).
  • The A7K fan will then run with the ozone plates off to cool the unit and spread ozone throughout the area.
  • If the 12 Hours LED light is on beside the repeat cycle indicator, the cycle will repeat in 12 hours.
  • The unit will produce ozone for the selected amount of time (30 minutes, 1 hour, 2 hours or 4 hours).
  • The A7K fan will then run with the ozone plates off to cool the unit and spread ozone throughout the area.
  • The 12-hour cycle will repeat until the machine is turned off. If the 24 Hours LED light is on beside the repeat cycle indicator, the cycle will repeat in 24 hours.
  • The A7K fan will then run with the ozone plates off to cool the unit and spread ozone throughout the area.
  • The 24-hour cycle will repeat until the machine is turned off.

CAUTION: Be sure to allow the unit’s fan to run 30 minutes at the end of the ozone cycles to cool the unit properly. If the unit is not properly cooled, damaged plates will result.

NOTE: When the unit is powered off, the machine will default to the last settings used when powered on again.

To purchase an A7K, click here



Older Post Newer Post


Leave a comment

Please note, comments must be approved before they are published

Related Posts

Replacing A7K Ozone Generator Control Board
Replacing A7K Ozone Generator Control Board
Follow this video walkthrough to replace the control board in the A7K Air Ozone Generator.
Read More
How to Remove Mold with Ozone Generators
How to Remove Mold with Ozone Generators
The A7K Ozone Generator can be used to kill mold once the source of the mold or mildew has been removed. 
Read More
How to Clean A7K Air Ozone Generator Plates
How to Clean A7K Air Ozone Generator Plates
Cleaning the A7K Air Ozone Generator plates regularly will greatly prolong the life of the unit.
Read More